Structured Packing for Biogas Upgrading

Biogas upgrading strips H₂S and CO₂ to produce pipeline-quality biomethane. The absorber must achieve high separation efficiency in a compact column while resisting H₂S corrosion, and the packing must be robust against foaming and biological fouling from the digester gas.

The Operating Environment

Wet biogas with H₂S and CO₂, amine or water-wash solvents, moderate temperature, potential foaming and biological fouling.

Packing Selection Logic

Structured packing wins here because biogas plants value compact, efficient columns and low pressure drop. Corrugated sheet metal packing in SS316L resists H₂S; wire mesh gives maximum efficiency for the cleanest gas. Plastic structured packing suits small water-scrubber units. Surface area of 250–350 m²/m³ is the sweet spot.

Recommended Products

ProductWhy It Fits
Corrugated Sheet Metal Packing (SS316L)High efficiency, low pressure drop and H₂S resistance in a compact column.
Wire Mesh Structured PackingMaximum efficiency for high-purity biomethane where gas is clean.
Plastic Structured Packing (PP/PVDF)Corrosion-resistant, lightweight option for water-wash scrubbers.

Common Failure Modes & How to Avoid Them

  • SS304 packing corroding under H₂S — always specify SS316L or duplex.
  • Foaming reducing mass transfer and causing carryover.
  • Biological fouling blinding fine wire mesh.
  • Undersized surface area limiting CO₂ removal to specification.

Frequently Asked Questions

Why structured packing for biogas upgrading?

It delivers high efficiency in a compact column with low pressure drop, which biogas plants need for both performance and operating cost.

Which stainless steel resists H₂S?

SS316L or duplex. SS304 is not adequate for wet H₂S service.

What surface area should I specify?

250–350 m²/m³ is typical. We size it against your gas rate and target CO₂ removal.

How do I handle foaming?

Structured packing is more foam-tolerant than random packing. Anti-foam measures and adequate disengagement space also help.

Is plastic structured packing suitable?

Yes for water-wash scrubbers at moderate temperature, but confirm chemical compatibility with your solvent.

Related Packing & Internals

Corrugated Sheet Metal Packing

Corrugated sheet metal structured packing equivalent to Mellapak. High capacity, low pressure drop for absorpt…

Wire Mesh Structured Packing

Wire mesh structured packing for high-efficiency distillation and absorption. Low HETP, low pressure drop. Fac…

Plastic Structured Packing

Plastic structured packing in PP and PVDF for corrosive scrubber and absorption service. Lightweight, chemical…

Get a recommendation for Structured Packing for Biogas Upgrading

Tell us your flow rate, medium and operating conditions — we recommend the right packing and internals, and quote factory-direct.

Request a Quote WhatsApp