Materials Guide

Material choice is usually the first and most important packing decision. This table summarises temperature limits, density and corrosion behaviour to help you shortlist. We confirm the final material against your exact medium and temperature.

Material Max Temp Density Corrosion Best For
PP
Polypropylene
100°C 0.91 g/cm³ Good — most acids, alkalis, salt solutions Acid scrubbers, water treatment, general low-temperature corrosive service
PVDF
Polyvinylidene fluoride
150°C 1.78 g/cm³ Excellent — strong acids, chlorides, halogens Chlorine/HCl service, higher-temperature acid scrubbers, high purity
PTFE
Polytetrafluoroethylene
260°C 2.2 g/cm³ Outstanding — virtually inert Most aggressive media, hot concentrated acids, high purity
SS304
Stainless Steel 304
~400°C (mechanical) 7.93 g/cm³ Good — clean atmospheric and mild chemical Clean hydrocarbons, general distillation, non-chloride service
SS316 / 316L
Stainless Steel 316 / 316L
~400°C (mechanical) 8.0 g/cm³ Very good — molybdenum resists chlorides and acid gas CO₂/H₂S service, amine units, marine, sour gas
Duplex
Duplex / Super-duplex stainless
~300°C 7.8 g/cm³ Excellent — high chloride and stress-corrosion resistance High-chloride service, seawater, high stress
Ceramic
Chemical porcelain / alumina ceramic
>1000°C 2.3–3.9 g/cm³ Outstanding — acids and high temperature Hot acid manufacture, high-temperature gas scrubbing
Carbon
Carbon / graphite packing
High (non-oxidising) ~1.5 g/cm³ Excellent — HF, strong oxidising acids HF service, strong oxidisers that attack ceramic and metal

What to Avoid

  • PP: Strong oxidisers, aromatic hydrocarbons, hot chlorine, >100°C
  • PVDF: Strong hot alkalis, some polar solvents
  • PTFE: Molten alkali metals, fluorine gas (limited)
  • SS304: Chlorides, wet H₂S, hot acids
  • SS316 / 316L: Strong reducing acids, hot concentrated chlorides
  • Duplex: Strong reducing environments
  • Ceramic: HF and fluoride media, thermal shock, mechanical impact
  • Carbon: Strong oxidising atmospheres at high temperature

Not sure which material survives your medium?

Tell us your flow rate, medium and operating conditions — we recommend the right packing and internals, and quote factory-direct.

Request a Quote WhatsApp