Packing for Vacuum Deaeration
Vacuum deaerators remove dissolved oxygen from boiler feedwater to prevent corrosion. The packing must provide efficient gas-liquid contact to strip oxygen to low levels while operating under vacuum, where pressure drop is especially critical.
The Operating Environment
Feedwater at vacuum, low dissolved oxygen targets, low pressure drop requirement, moderate temperature.
Packing Selection Logic
Low pressure drop is paramount under vacuum. High-surface-area packing maximises oxygen stripping efficiency. Corrosion-resistant materials (stainless or plastic) protect the high-purity water.
Recommended Products
| Product | Why It Fits |
| Plastic Pall Ring (PP) | Lightweight, corrosion-resistant, and provides good mass transfer at low pressure drop. |
| Corrugated Sheet Metal Packing (SS316L) | High efficiency and low pressure drop for larger deaerators. |
Common Failure Modes & How to Avoid Them
- High pressure drop limiting vacuum achievable.
- Insufficient surface area failing to meet oxygen spec.
- Corrosion products contaminating feedwater.
- Channeling from poor distribution.
Frequently Asked Questions
Why is pressure drop critical in vacuum deaeration?
Under vacuum, any pressure drop directly limits the achievable vacuum level, so low-pressure-drop packing is essential.
What oxygen level can vacuum deaeration achieve?
Typically below 20 ppb dissolved oxygen with proper packing and operation.
Which material protects feedwater purity?
Stainless steel or plastic, which do not shed corrosion products into the water.
What surface area do I need?
We size it against your flow rate and target oxygen level.
Can I retrofit my deaerator?
Yes, we supply replacement packing matched to your vessel.
Related Packing & Internals
Plastic pall ring in PP, PVDF and PTFE for corrosive and low-temperature scrubbing. Lightweight, chemical-resi…
Corrugated sheet metal structured packing equivalent to Mellapak. High capacity, low pressure drop for absorpt…
Get a recommendation for Packing for Vacuum Deaeration
Tell us your flow rate, medium and operating conditions — we recommend the right packing and internals, and quote factory-direct.
Request a Quote WhatsApp