Refractory Balls & Heat Storage Media
A refractory ball bed is a heat exchanger made of spheres: it absorbs heat from a hot gas, then gives it back to the cold stream on the reverse cycle. The media must survive that reversal thousands of times without spalling, and must not soften under the load of the bed above it. This is a materials problem more than a shape problem.
Specifications
| Parameter | Detail |
| Form | Solid spheres, refractory body |
| Duty | Heat storage and recovery beds, hot gas distribution, refractory packing |
| Key selection inputs | Peak temperature, cycle frequency, thermal gradient, bed depth and load |
| Critical properties | Refractoriness under load, thermal shock resistance, low spalling |
| Related grades | High alumina for load bearing, porous for surface area duty |
Available Materials
High alumina refractory · Mullite · Chamotte / fireclay based bodies
Typical Applications
- Hot blast stoves and regenerative heat exchangers
- RTO and thermal oxidiser heat exchange beds
- High temperature gas distribution layers
- Refractory linings and vessel protection layers
- Kiln and furnace packing
How the Options Compare
Refractory media are chosen for temperature and cycling, not for mass transfer. Compared with a structured heat exchange block they are cheaper and easier to replace in sections, but they carry more pressure drop and occupy more volume for the same heat transfer.
Frequently Asked Questions
How do I choose between refractory and high alumina balls?
Both are refractory bodies; the difference is where the emphasis sits. Heat storage duty stresses thermal shock resistance, while deep beds stress refractoriness under load. Send the temperature profile and cycle and we will match the body.
Can the bed be replaced in sections?
Yes. Beds are normally removed and reloaded in layers, and we can supply replacement media without disturbing the supporting structure if it is still sound.
Do you provide support layers for these beds?
Yes — graded support media and support plates are supplied together with the working bed so the load path is designed as one system.
More Ceramic Balls
Inert alumina ceramic balls for catalyst bed support, hold-down and flow distribution in reactors, columns and…
High alumina balls for heavy catalyst beds, high temperature reactors and refractory duty. Higher crush streng…
Porous ceramic balls with open structure for gas filtration, flow distribution and as a catalyst carrier base.…
Ask about refractory ball
Tell us your flow rate, medium and operating conditions — we recommend the right packing and internals, and quote factory-direct.
Request a Quote WhatsApp