Ceramic Berl Saddle

Ceramic Berl Saddle

The Berl saddle is the oldest of the saddle family and still one of the most practical. Its arched shape stacks less densely than a ring, so gas finds a path through the bed with less resistance, and liquid spreads sideways along the curved surface instead of running straight down. For acid absorption, drying and cooling towers where the duty is dirty and the budget is tight, it remains a sound choice.

Specifications

ParameterValue
FormArched saddle, no internal partitions
Nominal sizes25 mm, 38 mm, 50 mm, 76 mm
MaterialChemical stoneware and acid-proof porcelain
PorosityLow: dense body that resists acid penetration
Thermal behaviourHandles normal drying tower cycling; avoid quenching a hot bed
LoadingRandom dumped over a graded support layer
Selection inputsTower diameter, gas and liquid rates, acid concentration and temperature

Available Materials

Chemical stoneware · Acid-proof porcelain

Typical Applications

  • Sulphuric acid drying and absorption towers
  • Hydrochloric acid absorption
  • Scrubbers and gas cooling towers
  • Drying of chlorine and other wet gases
  • Pickling line and fume scrubbing

How It Compares

Against a ceramic Raschig ring the Berl saddle gives lower pressure drop and higher capacity for a modest cost increase. Against an Intalox saddle it is cheaper and more open, but its liquid redistribution is weaker, so it suits shallow beds better than tall ones. Against a modern high-performance ring it is heavier and less efficient, which is why it is chosen for robustness and price rather than for performance.

Frequently Asked Questions

Berl saddle or Intalox saddle?

Berl is the cheaper, more open shape; Intalox redistributes liquid better and gives higher efficiency in a tall bed. For a shallow, dirty scrubber Berl is usually enough. Where the tower height is set by mass transfer, Intalox or a high-performance ring is the better investment.

Which size should I use?

Small sizes give more surface per cubic metre and suit smaller diameter towers; large sizes keep pressure drop down in big towers. As a rule the packing should be a modest fraction of the column diameter so the bed does not bridge against the wall.

Will the saddles break in service?

Not if they are loaded and wetted properly. Failures come from thermal shock, such as dumping cold liquid into a hot bed, and from point loading on a badly designed support. We size the support layer together with the packing.

Can it handle hydrofluoric acid?

No. Ceramic bodies are attacked by HF. For HF duty use PTFE packing instead, and check that the support and internals are suitable as well.

Related Products

Raschig Ring

Raschig ring in metal, plastic and ceramic. The classic random packing for simple, robust columns. Factory-dir…

Cascade Mini Ring (CMR)

Cascade Mini Ring (CMR) random packing for high-efficiency distillation and absorption. Lower height per theor…

IMTP Equivalent Packing

IMTP-equivalent saddle packing for high-capacity distillation and absorption. Open, non-nesting geometry. Fact…

Get a quote for Ceramic Berl Saddle

Tell us your flow rate, medium and operating conditions — we recommend the right packing and internals, and quote factory-direct.

Request a Quote WhatsApp