Ceramic honeycomb is a straight-channel monolith, extruded in blocks and stacked into whatever bed the duty needs. Because the channels are straight and open, gas passes with far less resistance than through a dumped bed of saddles or rings of comparable surface area, which is why the format shows up wherever heat has to be moved in and out of a large gas flow.
Two duties account for most of it. In a regenerative thermal oxidiser the honeycomb is the heat exchange medium, storing heat from the cleaned exhaust and giving it back to the incoming dirty gas. In a diesel particulate filter the same wall-flow geometry is the filter, with alternate channels plugged so the gas is forced through the porous wall and the soot is left behind.
Both are ceramic, both are extruded, and both live or die on the same two properties: thermal shock resistance and tolerance of whatever the gas carries. Fouling is the failure mode to design against, not strength.
Related to honeycomb ceramics
- Ceramic Balls — Support and hold-down media for beds above and below a catalyst.
- Filter Media — Granular media for water and wastewater rather than gas.
- Ceramic Structured Packing — The other ceramic geometry used for gas-liquid contact.