Ceramic Cross Partition Ring

Ceramic Cross Partition Ring

A cross partition ring is a ring with internal cross walls. That one detail changes what the packing is good at. The partitions carry load far better than an open ring, so the shape survives deep beds and dirty service, while the divided internal volume keeps splitting and recombining the gas path. It is the shape you reach for when the duty is dusty, hot, or both.

Specifications

ParameterValue
FormRing with internal cross partitions
Nominal sizes25 mm to 100 mm
MaterialChemical stoneware; high-alumina body for hotter duty
StrengthThick walls give high crushing strength for deep beds
DutyHeat exchange, gas cooling, dust-tolerant mass transfer
FoulingBetter than a fine ring, but the bed still needs a washing provision
Selection inputsGas temperature and dust loading, bed depth, cooling medium, allowable pressure drop

Available Materials

Chemical stoneware · High alumina body

Typical Applications

  • Dust-laden gas cooling and washing towers
  • Heat storage and regenerative heat exchange
  • Sulphuric acid drying towers
  • Gas cooling ahead of scrubbing
  • Combustion air and hot blast preheating beds

How It Compares

Against a Berl saddle the cross ring is heavier and gives less surface per cubic metre, but it resists crushing and stands up to dust far better because the partitions stop the bed compacting. Against structured packing it is far more tolerant of fouling, which is why it survives gas streams that would blind a structured element within weeks.

Frequently Asked Questions

Why use a partitioned ring instead of an open ring?

The internal walls carry load, so a deep bed does not crush the bottom layer, and they divide the gas path so the stream is repeatedly split and recombined. In dust-laden duty that also stops stable channels forming.

Is it used for mass transfer or heat transfer?

Both, but its strength is heat duty with dirty gas. Where the job is pure mass transfer in a clean stream, a shape with more surface area will be more efficient per metre of bed.

How do I keep the bed from blocking with dust?

Design in a flushing or soot-blowing cycle and choose a larger nominal size than you would for a clean stream. A coarse bed with periodic washing beats a fine bed that blinds.

Which body should I choose?

Stoneware for acid duty at moderate temperature. Where the bed runs hot or cycles thermally, a high-alumina body with better thermal shock resistance is the safer choice.

Related Products

Raschig Ring

Raschig ring in metal, plastic and ceramic. The classic random packing for simple, robust columns. Factory-dir…

Cascade Mini Ring (CMR)

Cascade Mini Ring (CMR) random packing for high-efficiency distillation and absorption. Lower height per theor…

IMTP Equivalent Packing

IMTP-equivalent saddle packing for high-capacity distillation and absorption. Open, non-nesting geometry. Fact…

Get a quote for Ceramic Cross Partition Ring

Tell us your flow rate, medium and operating conditions — we recommend the right packing and internals, and quote factory-direct.

Request a Quote WhatsApp