Ceramic Y-Type Partition Ring

Ceramic Y-Type Partition Ring

The Y partition ring places Y-shaped walls inside a ceramic ring, so the internal volume is divided into passages that keep the shape stiff while giving gas a tortuous path through the bed. Compared with a plain ring it holds its form under load, and compared with a cross-partition ring it leaves more open volume, which keeps pressure drop lower where flow is high.

Specifications

ParameterValue
FormRing with internal Y-shaped partitions
Nominal sizes38 mm to 100 mm
MaterialChemical stoneware; high-alumina on request
StrengthPartitioned walls give good crushing strength at moderate weight
DutyHeat storage, gas cooling, absorption in acid service
LoadingRandom dumped over a graded support layer
Selection inputsGas flow and temperature, bed depth, allowable pressure drop, acid environment

Available Materials

Chemical stoneware · High alumina on request

Typical Applications

  • Regenerative heat storage beds
  • Hot gas cooling towers
  • Acid absorption and scrubbing
  • Sulphuric acid plant duty
  • Emission control washing towers

How It Compares

Against the cross partition ring the Y shape is more open, so pressure drop is lower and the bed fouls less quickly, at some cost in surface area and strength. Against a Berl saddle it is stronger and better able to carry a deep bed. In practice the choice between Y ring and cross ring comes down to whether the limiting factor is pressure drop or bed strength.

Frequently Asked Questions

Y ring or cross ring?

If pressure drop or dust is the constraint, the Y ring. If bed depth and crushing load are the constraint, the cross ring. Both are ceramic, so neither is suitable for HF.

What is it used for in a sulphuric acid plant?

Mainly as heat storage and gas cooling media, and in drying tower duty. It tolerates the acid and the thermal cycling that the duty imposes, which is what limits other materials.

How deep a bed can it carry?

That depends on body strength and size. Send us the bed depth and the liquid load and we will check the crushing load and recommend the support layer grading.

Is a high-alumina version available?

Yes, on request, where the operating temperature or thermal cycling is beyond what stoneware handles comfortably.

Related Products

Raschig Ring

Raschig ring in metal, plastic and ceramic. The classic random packing for simple, robust columns. Factory-dir…

Cascade Mini Ring (CMR)

Cascade Mini Ring (CMR) random packing for high-efficiency distillation and absorption. Lower height per theor…

IMTP Equivalent Packing

IMTP-equivalent saddle packing for high-capacity distillation and absorption. Open, non-nesting geometry. Fact…

Get a quote for Ceramic Y-Type Partition Ring

Tell us your flow rate, medium and operating conditions — we recommend the right packing and internals, and quote factory-direct.

Request a Quote WhatsApp