Metal Random Packing Shapes

Metal Random Packing Shapes

Pall rings, Raschig rings and cascade mini rings cover most metal random packing duty, but not all of it. The rest of the family exists because each shape solves a specific limitation: fouling, liquid hold-up, pressure drop in a very tall bed, or the height of a laboratory column where a few centimetres of packing has to do the work of a metre. This page is the map of those shapes, so you can tell us which constraint you are fighting rather than which name you have heard.

Specifications

ParameterValue
Tellerette typeOpen spiral form with high voidage; wins where fouling and liquid hold-up matter more than efficiency
Nutter typeRing with slotted wall and internal tongues; high capacity for refinery and gas treating columns
VSP typeRing with vertical slotted walls; low pressure drop at high liquid load
Dixon typeFine gauze ring for small diameter and laboratory columns; very high efficiency per metre
Cannon typeRing with internal baffle for pilot and laboratory distillation
Triangle spiral typeWire spiral form for laboratory rectification where bed height is the limit
Standard shapesPall ring, Raschig ring, cascade mini ring and IMTP-type saddle are covered on their own pages

Available Materials

SS304 · SS316L · Carbon steel · Copper · Other alloys on request

Typical Applications

  • Revamps of refinery and petrochemical columns
  • Gas treating and amine units
  • Scrubbers where fouling is a risk
  • Pilot plant and laboratory distillation
  • Columns where pressure drop or bed height is the binding constraint

How It Compares

Choice among these shapes is driven by what limits the column, not by which is newest. If the limit is pressure drop, a VSP or Tellerette type opens the bed up. If it is capacity in a refinery column, a Nutter type is designed for exactly that. If it is height in a small column, a Dixon or triangle spiral ring packs high efficiency into a short bed. And if nothing is limiting, a pall ring or CMR is cheaper and easier to source. Tell us the constraint and we will point at the shape rather than the other way round.

Frequently Asked Questions

Do you supply these shapes or only the standard ones?

We supply them to order, in the alloy your medium requires. Because these are lower-volume shapes, lead time is normally longer than for pall rings, and we will confirm it against the drawing before you commit.

Can these be mixed with pall rings in one bed?

Not normally. Mixing shapes in a single bed usually gives worse performance than either alone, because the two stack differently and create uneven voidage. Layered beds are used deliberately, for example a coarse layer at the bottom to filter and distribute, but that is a designed arrangement, not a random mix.

What data do you need to recommend a shape?

Column diameter, vapour and liquid loads, operating pressure and temperature, required separation, and the constraint you are trying to fix. With those we can compare two or three shapes on capacity and pressure drop instead of guessing.

Are laboratory-size quantities available?

Yes. Dixon, Cannon and spiral forms are usually bought in kilogram quantities for pilot columns, and we supply them on the same basis as production orders.

Related Products

Raschig Ring

Raschig ring in metal, plastic and ceramic. The classic random packing for simple, robust columns. Factory-dir…

Cascade Mini Ring (CMR)

Cascade Mini Ring (CMR) random packing for high-efficiency distillation and absorption. Lower height per theor…

IMTP Equivalent Packing

IMTP-equivalent saddle packing for high-capacity distillation and absorption. Open, non-nesting geometry. Fact…

Get a quote for Metal Random Packing Shapes

Tell us your flow rate, medium and operating conditions — we recommend the right packing and internals, and quote factory-direct.

Request a Quote WhatsApp