Super Raschig Ring

Super Raschig Ring

A super Raschig ring is a plain Raschig ring with internal partition walls added. The change is small and the effect is not: the partitions break up the gas path, increase the effective surface per cubic metre and repeatedly renew the liquid film, which is the mechanism that limits a plain ring. It is the cheapest way to get more efficiency out of a column that is already fitted with Raschig rings.

Specifications

ParameterValue
FormRing with one or more internal partition walls
MaterialCeramic, carbon steel, stainless steel, PP and PVDF
Nominal sizes25 mm, 38 mm, 50 mm, 76 mm
Versus plain RaschigHigher efficiency and better liquid renewal, slightly higher pressure drop
StrengthPartitions stiffen the ring, so it carries a deeper bed than a plain ring
LoadingRandom dumped; no orientation requirement
Selection inputsColumn diameter, loads, required efficiency, medium and temperature

Available Materials

Ceramic · Carbon steel · SS304 / SS316L · PP · PVDF

Typical Applications

  • Absorption and stripping columns
  • Drying towers and acid towers
  • Scrubbers and gas washing
  • Heat exchange and cooling towers
  • Replacement of plain Raschig rings for a capacity or efficiency gain

How It Compares

Against a plain Raschig ring it raises efficiency per metre of bed at a small pressure drop penalty, and its partitions make it stiffer, so it can carry a deeper bed. Against a pall ring it is cheaper and simpler to make in ceramic, but the pall ring still wins on capacity because its wall is open rather than solid.

Frequently Asked Questions

Is it worth replacing plain Raschig rings with super Raschig rings?

If the column is efficiency-limited rather than capacity-limited, often yes, and it is the cheapest upgrade available because the bed geometry barely changes. We will check the pressure drop penalty against your blower margin before recommending it.

Which materials are available?

Ceramic for acid and high temperature duty, carbon and stainless steel where mechanical strength matters, and PP or PVDF for milder chemical service at lower cost.

How does it compare with a pall ring?

The pall ring has an open wall, so gas passes through the ring and capacity is higher. The super Raschig keeps a solid wall and gains its efficiency from internal partitions instead, which makes it cheaper to produce in ceramic and more robust in dirty service.

Can it be used in an existing ceramic tower?

Yes. Same nominal sizes, same loading method, same support design. In most cases the bed can be re-loaded size for size with no mechanical changes.

Related Products

Raschig Ring

Raschig ring in metal, plastic and ceramic. The classic random packing for simple, robust columns. Factory-dir…

Cascade Mini Ring (CMR)

Cascade Mini Ring (CMR) random packing for high-efficiency distillation and absorption. Lower height per theor…

IMTP Equivalent Packing

IMTP-equivalent saddle packing for high-capacity distillation and absorption. Open, non-nesting geometry. Fact…

Get a quote for Super Raschig Ring

Tell us your flow rate, medium and operating conditions — we recommend the right packing and internals, and quote factory-direct.

Request a Quote WhatsApp