4A Molecular Sieve

4A Molecular Sieve

The 4A sieve is the general-purpose member of the family: a wider pore than 3A, so it dries and also takes out CO2, H2S and other small polar molecules in the same pass. Where a plant needs one bed to do both jobs, this is usually the grade specified.

Specifications

ParameterDetail
TypeType A zeolite in the sodium form
Pore openingWider than 3A — admits water plus small molecules such as CO2 and H2S
BehaviourCombined drying and small-molecule removal in one bed
RegenerationThermal regeneration; pressure swing where applicable
Key selection inputsWater and CO2 loading, target dew point, stream composition, cycle time
FormSpherical beads and pellets

Available Materials

Zeolite 4A (sodium form) · Binder-bound beads

Typical Applications

  • Natural gas drying and sweetening
  • Refrigerant and HVAC dehydration
  • Air and instrument gas drying
  • CO2 and H2S removal from light streams
  • Static dehydration of packaged equipment
  • Liquid drying of solvents and monomers

How the Options Compare

Against 3A it removes more but is less selective; against 13X it has a smaller pore and lower capacity for bulky molecules such as mercaptans and heavier hydrocarbons. For most drying-plus-CO2 duties in light gas service, 4A is the economical middle ground.

Frequently Asked Questions

Will 4A remove H2S as well as water?

It can hold H2S along with water, which is useful in light gas polishing but is not a substitute for a dedicated sweetening process where sulphur loading is significant.

How do I choose between 4A and 13X?

By molecular size and loading. 13X has the wider pore and higher capacity for larger molecules such as mercaptans; 4A is the better economic fit for light-gas drying with modest CO2.

What bead size should I use?

It follows from vessel diameter, allowable pressure drop and mass-transfer requirements. Send the bed geometry and flow and we will recommend a size distribution.

More Adsorbents & Desiccants

Activated Alumina

Activated alumina balls for gas and liquid drying, fluoride removal, hydrogen peroxide purification and Claus …

Molecular Sieve 3A

3A molecular sieve (potassium form) for drying cracked gas, olefins and ethanol where CO2 and heavier componen…

Molecular Sieve 5A

5A molecular sieve (calcium form) for PSA oxygen generation, n-paraffin separation and combined drying with CO…

Ask about molecular sieve 4a

Tell us your flow rate, medium and operating conditions — we recommend the right packing and internals, and quote factory-direct.

Request a Quote WhatsApp