13X HP Molecular Sieve
The HP grade of 13X has the same faujasite structure as standard 13X, made to a tighter specification: higher capacity, better crush strength and lower attrition in a bed that cycles every few seconds. It is specified where the cycle is fast and the bed has to last, which means PSA and VPSA oxygen, medical concentrators, and the prepurifier that protects a cryogenic air separation unit.
Specifications
| Parameter | Detail |
| Form | Spherical beads |
| Structure | Type X faujasite, sodium form |
| Function | Water, CO2 and hydrocarbon removal; nitrogen adsorption in oxygen production |
| Strength | Higher crush strength and lower attrition than standard 13X |
| Cycle | Built for short-cycle PSA and VPSA duty |
| Selection inputs | Flow rate, pressure, cycle time, target water and CO2 outlet, purity required |
Available Materials
13X HP beads
Typical Applications
- PSA and VPSA oxygen plants
- Medical oxygen concentrators
- Air prepurification ahead of cryogenic separation
- CO2 and water removal from air and natural gas
- Hydrocarbon guard beds
How the Options Compare
Against standard 13X, the HP grade costs more and earns it back in bed life and stable capacity under fast cycling. Against lithium-exchanged sieve, 13X HP is cheaper and more tolerant of moisture excursions, while LiX holds more nitrogen capacity and therefore shrinks the bed in large oxygen plants. Which of the two is right depends on plant size and on how well the feed is pre-treated.
Frequently Asked Questions
13X HP or LiX for an oxygen plant?
For a large VPSA plant with good pre-treatment, LiX packs more nitrogen capacity per cubic metre and reduces bed size. For smaller plants, medical concentrators, or feeds where moisture excursions are possible, 13X HP is the more forgiving and more economical choice.
How is it different from standard 13X?
Same crystal, tighter specification: higher capacity, better crush strength, lower attrition. In a slow thermal swing dryer the difference is small. In a fast PSA cycle it decides whether the bed holds its capacity or slowly turns into dust.
What has to be removed before the sieve bed?
Water and oil aerosol. The sieve will take water, but every kilogram of water it takes is capacity not available for the real duty, and liquid water damages the beads. A dryer and coalescer upstream pay for themselves.
Beads or pellets?
Beads for PSA and VPSA, for better flow distribution and lower pressure drop. Pellets appear in some gas drying duties where surface-to-volume ratio matters more than pressure drop.
More Adsorbents & Desiccants
Activated alumina balls for gas and liquid drying, fluoride removal, hydrogen peroxide purification and Claus …
3A molecular sieve (potassium form) for drying cracked gas, olefins and ethanol where CO2 and heavier componen…
4A molecular sieve (sodium form) for gas and liquid drying, CO2 and H2S removal, refrigerant drying and static…
Ask about 13x hp molecular sieve
Tell us your flow rate, medium and operating conditions — we recommend the right packing and internals, and quote factory-direct.
Request a Quote WhatsApp